Intensifier pump and parts:
Intensifier pump accessories are composed of booster pump,
accumulator, high-pressure cylinder, check valve, inner liner,
piston, ceramic rod, sealing group, copper cake, end cover, plug,
etc. The parts are part of the booster accessories, and the booster
accessories also determine the waterjet cutting ability and
quality.
The direct drive pump is also known as the three-cylinder pump. As
the name implies, the crankshaft with three pistons is directly
driven to rotate by the motive to generate ultra-high water
pressure. The direct drive pump design method originated in the
United States, and has gradually matured and occupied a pivotal
weight in the waterjet industry. More than 20% of the market
waterjets use direct drive methods.
The booster oil pump is driven by oil pressure to form a larger
pressure, and the oil pump forms an ultra-high pressure, so the
accessories are generally made of hard metal materials, and the
failure rate during use is relatively low. The water jet of the
booster oil pump is the most widely used type of water jet booster.
1. In terms of pressure, the pressure of the booster oil pump is
generally higher than that of the direct drive pump, so it can cut
thicker metal materials and has a wider range of applications.
Although the waterjet of the direct drive pump cannot form such a
high pressure, it can be used in ceramic tiles. Cutting, food, and
cleaning operations are more cost-effective.
2. In terms of cost, the water jet of the pressurized oil pump will
require greater consumption. Ultra-high pressure operation requires
almost 30 degrees of electricity per hour. The monthly electricity
consumption is also very huge, while the direct drive pump type is
very economical, every hour. About ten kilowatt-hours of
electricity, only one third of the cost of the supercharged oil
pressure type. In addition, the cost of equipment, hydraulic
booster is also much higher than the cost of direct drive pump
equipment.
3. In terms of quality, direct-drive pumps are generally not used
for ultra-high pressure operations, so the parts and materials will
be mixed with plastics, and booster pumps have strict requirements
on metal materials, so the failure rate of booster pumps is much
lower than that of direct-drive pumps. Knife.
Direct drive pumps and pressurized waterjets have their own
advantages and disadvantages in all aspects. In fact, no matter
what type of waterjet, the first thing is to meet your own work.
Super high pressure chooses pressurized stable work, and medium and
low pressure use direct drive pumps to save costs.
Our waterjet cutting pump:
We have 420Mpa intensifier pump, 600Mpa intensifier pump ,direct
drive pump and 420mpa with dual intensifier pump, we also can
provide 3 axis , 5 axis with 10 degree and dynamic 5 axis with 60
degree cutting head water jet cutting machine, pure water cutting
and abrasive sand cutting. our machines are with excellent quality
- efficient and accuracy, economical investment with low initial
cost and low maintenance cost to our customers. All the machinery
delivered by us come with first class after-sale service. all
machines are with one-year warranty of main parts, whole-life
after-service for the entire machine.Our new FLOW type cutting head
can improve you 10% cutting efficiency, and our new technology can
make the machine moving speed to 30-50m/min so that reduce you
15%-50% cutting cost according to the materials.
In fact, no matter what type of waterjet, the first thing is to
meet your own work. Super high pressure chooses pressurized stable
work, and medium and low pressure use direct drive pumps to save
costs.
Customer Service:
We have exported to more than 20 countries yet, and now have agent
in America, Russia,South
Africa,Ecuador,UK,Argentina,Chile,Mexico,Austrilia,Saudi Arabia and
other GCC countries, Malaysia,Vietnam. we can arrange engineers go
to customer's factory if no agents in their country.
